Versatile and Productive
Progressive’s 15½ foot TDR-15B Tri-Deck Roller finishing roller mower is an ideal choice for municipal grounds care, parks, sports facilities, polo fields, or estates, in either wet or dry conditions. This versatile mower can cut as low as ½ inch. Full width rollers smooth the field surface and stripe for a pleasing visual impact. The rollers can speed divot repair, promote root-to-soil contact, aid plant health and help moisture retention. The superior quality cut comes from high lift rotary blades that create enough vacuum to lift the grass for a clean uniform cut and then disperse the clippings evenly over the rollers. Easy access to height adjusters makes setting the height of cut quick and precise. Rear rollers also provide extra protection for the discharge of clippings and debris. Progressive’s exclusive Pro Lift-N-Turn™ is standard equipment — this allows the decks to be temporarily lifted slightly off the ground with the PTO still engaged and without fear of driveline damage. The TDR-15B is another example of the ingenuity and quality that goes into producing a durable and productive rotary finishing mower that is easy to maintain. The TDR-15B not only provides versatility of use and quality of construction, it is “The Better Built Choice”.

TDR-15B Tri-Deck Roller Mower Specifications

Part Number: 528750B painted deck shells
Cutting Width: 4.7 m / 15.5 feet
Mowing Capacity: 2 mph 3.75 acres per hour, 4 mph 7.5 acres per hour, 6 mph 11.3 acres per hour*
Transport Tires:  P275 / 60R 15 Automotive radials
Recommended PTO H.P.: 30 to 50
Transport Width: 97”
Transport Height: 7’ 10”
Transport Length: 14’
Operating Weight: 3,725 lb.

*Assumes no overlap or turning

Full width 6” diameter steel rollers front and back follow the ground contours and help prevent scalping while they smooth the field surface and aid in moisture retention. A high blade tip speed (18,300 fpm) ensures a high quality finish cut, while a choice of four blade types allows the TDR-22 / TDR-22G to be tailored to meet your specific requirements. The unique bolt-on deck design in a choice of either painted or galvanized deck skins, lowers the cost of ownership over the long term. Independent suspension on the transport wheels provide smoother travel between fields. The second generation TDR-22 has introduced several significant changes including: revised wing pivot geometry, enhanced fore/aft deck balance, an extra wide transport tire option that further reduces ground pressure and a focus on reduced maintenance requirements lowering the cost of ownership and operation.

Ideal Front to Back Deck Balance.
The deck pull points are positioned slightly ahead, but much closer to the deck than how competitive models are designed. The TDR-22 decks are pulled – not pushed with the result that there is less loading on the front roller, making the TDR-22 well suited for use in soft ground conditions, while the ability to follow changing contours is unsurpassed. Requires one float circuit.

Bolt-on Deck Galvanized decks:
For producers who grow in sandy, or acidic soil conditions, the bolt on deck design allows for inexpensive replacement of the deck if necessary. The galvanized skin provides added protection necessary for long life in these types of soil conditions or where rusting from fertilizer use is a concern.

TDR-22 / TDR-22G Tri-Deck Roller Mower Specifications

Part Number: 526822 standard painted decks / 526822G galvanized deck option
Cutting Width: 6.7 m / 22 feet
Recommended PTO H.P.: 65 to 75
Infinitely Variable Cutting Height: ½” to 4”
Mowing Capacity: 4 mph 10.7 acres per hour, 6 mph 16.0 acres per hour, 7.5 mph 20.0 acres per hour*
Transport Width: 97”
Transport Height: 10’ 2”
Transport Length: 15’
Transport Tires: LT305/70R-16 Automotive high floatation
Operating Weight: 5,820 lb.

*Assumes no overlap or turning

More cuts per meter, a finer finish cut at a fraction of the operating cost.
The TDR-22-6 introduces a 6 blade deck using 406mm long blades. These blades and a high tip speed provides more cuts per meter of travel, resulting in a finer finish cut, similar to that of a reel mower but at a fraction of the operating cost! The TDR-22-6 offers unparalleled performance and value as it incorporates many standard features and the reduced maintenance designs that have been field proven in existing production mowers.

Six-way deck float allows the full width 50 mm diameter steel rollers on the front and back of each deck to follow changing ground contours. The productivity advantage of Progressive’s exclusive Pro Lift-N-Turn™ is standard equipment on the TDR-22-6.

Operators can slightly raise the decks off the ground with the PTO engaged, making the TDR-22-6 “easy on the turf” when turning at the headlands, resulting in more harvestable acres! The unique bolt-on deck design lowers the cost of ownership over the long term. Independent suspension provides smoother travel between fields and the standard high floatation tires minimize ground compaction. The peace-of-mind reliability and productivity of the TDR-22-6 is only available from Progressive.

A Finer Finish Cut with Six Blades 
The TDR-22-6 have 6 blades in each of the three decks. They are equipped with replaceable Pro-Ez blade tips for efficient and economical operation. The high tip speed of the 406 mm long blades provides more cuts per meter of travel, resulting in a finer finish cut, similar to that of a reel mower but at a fraction of the operating cost.  Forward openings in the bolt-on deck shells enhance air flow which both aids in standing the grass up before cutting as well as permitting the even distribution of the discharged clippings.

TDR-22-6 Tri-Deck Roller Mower Specifications

Cutting Width: 6.7 m (22 ft)
Mowing Capacity: 6.5 kmh 4 ha (4 mph 10,7 acres) per houre, 10 kmh 6 ha (6 mph 16,0 acres) per houre, 12 km 8 ha (h 7,5 mph 20,0) acres per houre*
Transport Tires: LT305/70R-16 Automotive high floatation, Standard equipment.
Extra wide turf tire (33×16 LL-16.1 10pr), Optionally available.
Recommended PTO H.P.: 65 à 75 hp
Infinitely Variable Cutting Height: 13 to 100 mm (0,51” to 3,93”)
Transport Width:  2642 mm (8,66 ft)
Transport Height: 3658 mm (12 ft)

*Assumes no overlap or turning

Maximizing productivity and reducing operating cost is what the TDR-26 / TDR-26G is all about. Designed with a ‘ideal sized’ 25’8” cutting swath, it balances the need for increased cutting capacity in a cost effective roller mower. The TDR-26 / TDR-26G is “easy on the turf” when turning at the headlands for more harvestable acres! Like all of our mowers, we designed the TDR-26 as if we were maintaining the mower ourselves, so simplifying and reducing service requirements was an important goal. Maintenance free blade spindles, sealed roller end bearings, with extended 100 hour PTO shaft greasing intervals and fewer grease fittings overall means more time cutting – less time maintaining. We kept it simple: no electro-hydraulic valves or sensors are required. For the ultimate in reliability, many components are fully interchangeable with Progressive’s field proven TDR-22 and TDR-30 models. Focusing on the needs of the turf producer, Progressive offers four blade options for the TDR-26. The producer can optimize their cut and maintenance costs depending upon the growing conditions by selecting between two fixed blades and two Pro-EZ Change replaceable tip blade options – all featuring Progressive’s renown cut quality. Peace-of-mind reliability and productivity is only available from a Progressive mower.

Simple and Easy Operation:
The TDR-26 / TDR-26G retains the easy maneuverability and simple operation of a trideck mower. Requiring just a single hydraulic circuit with float, the TDR-26 / TDR-26G can easily track changing contours as each deck as six-ways of float. A single pull rope releases the transport locks so there’s no need to dismount the tractor.

Bolt-on Deck Galvanized decks:
For producers who grow in sandy, or acidic soil conditions, the bolt on deck design allows for inexpensive replacement of the deck if necessary. The galvanized skin provides added protection necessary for long life in these types of soil conditions or where rusting from fertilizer use is a concern.

TDR-26 / TDR-26G Tri-Deck Roller Mower Specifications

Part Number: 530826 / 520826G (Galvanized deck shells)
Cutting Width: 7,9 m / 25’ 8”
Mowing Capacity: 4 mph 12.4 acres per hour, 6 mph 18.6 acres per hour, 7.5 mph 23.0 acres per hour*
Transport Tires: Extra-wide high floatation tire (33×16 LL-16.1 10pr)
Recommended PTO H.P.: 75 to 90
Infinitely Variable Cut Height: 1/2” to 4”
Transport Width: 104”
Transport Height: 12’
Transport Length: 17’
Operating Weight: 6,200 lb.

*Assumes no overlap or turning
The tractor is required to have one hydraulic float circuit

Designed to increase productivity on every pass!
Progressive once again has raised the bar in the favor of turf grass producers, offering unmatched productivity on every pass. The TDR-30G Roller Mower was designed with a ‘right sized’ 29’6” cutting swath. Progressive has balanced the need for increased cutting capacity with the available horsepower of tractors commonly used in sod production. The TDR-30G’s unique Flex-Deck design covers more width per pass and is “easy on the turf” when turning at the headlands ,for more acres cut in less time! Focusing on the needs of the sod producer, Progressive offers four blade options for the TDR-30G. The producer can optimize his cut and maintenance costs depending upon the growing conditions by selecting between two fixed blade lifts and two Pro-EZ Change Blade options – all featuring the renown Progressive cut quality. Like all of our mowers, we designed the TDR-30G as if we were maintaining the mower ourselves, so eliminating all daily service requirements was an important design goal. Maintenance free blade spindles, extended 100 hour PTO shaft greasing intervals and fewer grease fittings all mean more time cutting – less time maintaining. And to keep the TDR-30G cutting over the long term, pivot bushings are easily replaced.

Bolt-on Deck Galvanized decks:
For producers who grow in sandy, or acidic soil conditions, the bolt on deck design allows for inexpensive replacement of the deck if necessary. The galvanized skin provides added protection necessary for long life in these types of soil conditions or where rusting from fertilizer use is a concern.

TDR-30G Tri-Deck Roller Mower Specifications

Part Number: 607930G with galvanized decks
Cutting Width: 9 m /  29’ 6”
Mowing Capacity: 4 mph 14.3 acres per hour, 6 mph 21.5 acres per hour, 7.5 mph 26.8 acres per hour*
Transport Tires: Wide profile turf tire (33×16 LL-16.1 10pr)
Recommended PTO H.P.: 85 to 130
Infinitely Variable Cutting Height: ½” to 3½”
Transport Width: 9’
Transport Height: 13’
Transport Length: 17’
Operating Weight: 7,700 lb.

*Assumes no overlap or turning.
The tractor is required to have one hydraulic float circuit.

Watch video

The Benchmark Mower of the Sod Industry
Since its introduction in 1990, Progressive’s 22 foot wide TD92 Tri-Deck Rotary Finishing Mower has become the benchmark mower of the turfgrass industry. It is considered to be the most productive and cost effective wide-area turfgrass mower available while delivering a quality of cut, second to none. Following extensive customer input, the Next Generation TD92 raises the bar even higher with new features that will enhance productivity and further reduce ongoing maintenance requirements and cost. The Next Generation TD92 will be available with either painted or galvanized, bolt-on deck shells. Proudly built in North America, some of the standard features of the Next Generation TD92 include: enhanced clipping discharge, Maintenance Free Blade Spindles, extended 100 hour PTO Shaft Greasing intervals and fewer grease fittings than prior models. Four different OEM blades are available to match local growing conditions, . Retaining many of the same components and design features that have been field proven on over 2,100 older TD92’s, means that there is more time cutting, less time maintaining and more money in your pocket each day! The Next Generation TD92 raises the bar to new heights as the Better Built Choice!

Designed for the real world:
Progressive designed the TD92 mowing deck to provide even dispersion of clippings through an open rear discharge – avoiding clumping and windrows. Only minutes are required to change the cutting height from 3/4″ to 5″ – without the use of tools. An 8 position hitch adapts to many tractors.

Bolt-on Deck Galvanized decks:
For producers who grow in sandy, or acidic soil conditions, the bolt on deck design allows for inexpensive replacement of the deck if necessary. The galvanized skin provides added protection necessary for long life in these types of soil conditions or where rusting from fertilizer use is a concern.

TD92 Tri-Deck Finishing Mower Specifications

Part Number: 629222 (painted deck shells) 629222G (galvanized deck shells)
Cutting Width: 6.7 m / 22 feet
Cutting Height:  3/4” to 5” in ⅜” steps
Mowing Capacity:  2 mph 5.4 acres per hour, 4 mph 10.7 acres per hour
6 mph 16 acres per hour, 7.5 mph 20 acres per hour*
Transport Tires: P275 / 60R 15 Automotive radials
Recommended PTO H.P.: 45 to 70
Transport Width: 9.5 feet
Transport Height: 10 feet
Transport Length: 15 feet
Operating Weight: 4,100 lb.
Turning Radius (uncut circle):  Zero

*Assumes no overlap or turning

One Awesome Super-mower
The PM-36 when paired with the Progressive TD92 rotary finishing mower, creates the Pro-Max 36 mowing system. Towed by a ~100 H.P. tractor, the Pro-Max 36 mowing system delivers a 36 foot wide cut swath and can mow up to 33 acres per hour. With the ability to reverse in a controlled manner, the Pro-Max 36 mowing system excels in a high production environment. The Pro-Max 36, although a large machine has a light footprint making it ideal in wet conditions. Following extensive customer input, the Next Generation PM-36 raises the bar even higher with new features that will enhance productivity and further reduce ongoing maintenance requirements and cost. Proudly built in North America, some of the components and standard features of the Next Generation PM-36 are shared with the TD92 and include: enhanced clipping discharge and maintenance free blade spindles that reduce the cost of routine maintenance. The Next Generation PM-36 will be available with either painted or galvanized, bolt-on deck shells. Four different OEM blades are available to match local growing conditions. If you want to increase your mowing productivity, simply attach your current TD92 to a Pro-Max 36 and enjoy years of reliable mowing with the best productivity in the industry. The Pro-Max 36 is not just one awesome super-mower, it is also, “The Better Built Choice”.

Pro-Max Mowing System:
The Progressive Pro-Max Mowing System is a 5 deck finishing mower that is the combination of the highly successful Progressive TD92 and the PM-36. Together they provide a wide 36 foot cut swath and give a whole new meaning to productivity! Often growers will begin with the 22’ wide TD92 and add a PM-36 at a later date to meet their increased production needs. A Pro-Max Mowing System requires two double acting hydraulic circuits, one with float capability.

Bolt-on Deck Shell:
Painted or Galvanized Versions Available For producers who grow in sandy, or acidic soil conditions, the bolton design allows for inexpensive replacement of the deck shell if necessary. The bolt-on shell feature is made possible because only Progressive uses a separate deck and frame design. The galvanized deck shell option of the PM-36 provides added protection necessary for a long service life in conditions where rusting is a concern.

Designed for the real world:
The PM-36 mowing deck is designed to provide even dispersion of clippings through a large open rear discharge, avoiding clumping and windrows. Only minutes are required to change the cutting height from 3/4″ to 5″ – without the use of tools. Easy clipping clean out is incorporated into the deck frame design.

Commonality of Parts:
For simple servicing and part availability, many key components are common between the PM-36 and TD92. For instance, all 5 mower deck components are totally interchangeable. This keeps the stock of spare parts required to a minimum and uptime to the max!

Maintenance Free Blade Spindles
Developed and tested over several years, Maintenance Free Blade Spindles are used to both lower the cost and time spent on routine maintenace. They also provide peace of mind that a missed greasing won’t render the mower out of service.

Pro-Max 36 Mowing System Specifications

Part Number: 629236 (painted deck shells) 629236G (galvanized deck shells)
Cutting Width: 10.9 m / 36 feet **
Cutting Height:  3/4” to 5” in ⅜” steps
Mowing Capacity:  2 mph 8.8 acres per hour, 4 mph 17.5 acres per hour*
6 mph 26.0 acres per hour, 7.5 mph 32.8 acres per hour*
Transport Tires: P275 / 60R 15 Automotive radials
Operating Weight: 4,600 lb.
Turning Radius (uncut circle): Zero
Recommended PTO H.P.: 80 to 110**
Transport Width: 13 feet
Transport Height: 13 feet
Transport Length: 29.8 feet**
Combined Operating Weight: 8,700 lb.**

*Assumes no overlap or turning, complete Pro-Max system.
** Complete Pro-Max System (TD92 and PM-36).

Superior Quality – Superior Cut
The Progressive TD65 is a Tri-Deck rotary finishing mower providing a 15.5 foot cut. The TD65 is both operator and maintenance friendly and it has become the choice of sod professionals for mid-size operations for many years. The three independent floating decks are mounted on a robust transport frame. These decks conform to and follow most undulations and other ground conditions. By using your 30-50 H.P. tractor the TD65 can mow up to 90 acres in an eight hour day. Field proven, Maintenace Free Blade Spindles offer peace of mind and lower cost of operation. The superior cut is the result of our deck design. High lift rotary blades create enough vacuum to lift the grass for a smooth, even cut and then disperse the clippings evenly through the rear discharge system which is unique and an integral part of the deck design. The result is a superior after cut appearance. Only minutes are required to change cutting heights from 1” to 5” without the use of tools. In addition, all operating functions for transport and mowing positions are activated from the tractor seat. The TD65 is another example of the ingenuity and quality that goes into producing a durable, reliable, rotary finishing mower that is easy to maintain. The TD65 is not only of superior quality, providing a superior cut, it is “The Better Built Choice”.

Maintenance Free Blade Spindles :
Developed and tested over several years, Progressive TD65B incorporates maintenance free blade spindle assemblies as standard equipment. Completely interchangeable with a greased spindle, the same housing is used providing wide spacing between the bearings ensuring low bearing loading and long service life. Maintenance free blade spindles not only protect the owner’s investment from a missed service, it also reduces overall maintenance time and costs.

A superior cut for a superior finish:
High lift rotary blades create enough vacuum to lift the grass for a clean even cut and then disperse the clippings evenly through the rear of each deck for a superior after cut appearance. An optional mulching kit is available to help return clipping nutrients to the soil. High flotation tires support each floating deck ensuring good ground contour tracking without the fear of soil compaction.

Designed for the real world:
Progressive designed the TD65B mowing deck to provide even dispersion of clippings through the open rear discharge area – avoiding clumping and windrows. Only minutes are required to change the TD65B cutting height from 1″ to 5″ without the use of tools. For convenience and safety, all transport and mowing functions are activated without the operator leaving the tractor’s seat.

TD65B Tri-Deck Finishing Mower Specifications

Part Number: 526515B
Cutting width: 4.7 m / 15.5 feet
Recommended PTO HP: 30-50
Mowing Capacity: 2 mph 3.7 acres / hour, 4 mph 7.5 acres / hour, 6 mph 11.3 acres / hour*
Turning Radius: 0” uncut circle (zero turning radius)
Transport Tires: Two 18 X 9.50 X 8 NHS, 6 ply, Turf Saver Tires,
Optional road transport tires available
Cutting Height: 1” to 5” in ⅜” steps
Weight:  2720 lbs
Transport Width: 8.5 feet
Transport Height: 7.5 feet
Transport Length: 14 feet

*Assumes no overlap or turning, complete Pro-Max system.